If you’re a regular blog reader, you will likely recall my description of “
The Enigmatic Heathkit CR-1 Crystal Radio” a few weeks ago.
Back then I mentioned
that I was ‘eager to get my mitts on one’ and that I had arranged to borrow a
CR-1 from another VE7 who was fortunate enough to own one.
A few weeks after
posting the blog, I received an e-mail from
Larry,
WB5OFD, in Texas.
"
Reading thru your blogs the other night ...
discovered your article on Crystal Radio reception reports. I am in the
process of disposing of a lot of radio gear I have collected over the past sixty
years and in that pile is a Heathkit CR-1. Yours for free if you would like to
have it."
Needless to say I was overjoyed, both at the opportunity to actually own a
CR-1 myself and at Larry's exceptional generosity!
Larry went on to explain
that he had been in the Air Force and his
little
CR-1 had been all around the world with him, from Alaska to Turkey ... but from its fine appearance, you would never
know it.
 |
| Larry's gift! |
He was happy to pass it on knowing that it was going
to a good home. I am most appreciative of this kind gesture from a fellow
radio amateur, knowing that these things are not too easy to find ... and are somewhat pricey!
As can be seen in the schematic diagram above, the
CR-1 is a simple double-tuned crystal receiver, utilizing a
series-tuned tank circuit for antenna-tuning, inductively coupled into the detector tank
circuit. The detector diode, a 50’s-era 1N34, is tapped down on the tank for
headphone impedance-matching and to reduce circuit loading. Reducing the
load on the tank circuit improves selectivity but diminishes sensitivity.
Crystal radio design is always a trade-off between these two
critical characteristics.
Although I had heard good things about the
CR-1, I must
admit that I was somewhat skeptical ... just how good could an unmodified
CR-1’s
simple double-tuned design really be? I was about to find out.
My
listening location, on the eastern shoreline of Mayne Island, puts me directly
across several miles of saltwater from sixteen exceptionally loud 'blowtorch' signals whose
antennas are located near the water on the other side of Georgia Strait. Many of these stations run
50kW ... 24/7. All of
these signals are wide and strong, being well-over S9. It is a difficult
location for crystal radio DXing as separating weak DX signals from the blowtorches
can be challenging.
My previous experience with crystal radio
DX is well-documented
on my website here. Back then, I quickly adopted the
standard protocols to help hear DX. This included the use of a separate
‘spotter’ radio to first find signals that might possibly be strong enough to be heard on the
crystal detector. I also used an RF signal generator that let me temporarily put a weak
tone-modulated carrier on the frequency of a station that I was trying to hear.
Using the tone, the antenna tuning as well as the detector
circuit can be peaked for maximum signal. I also used a 100 microamp meter in series with the
headphones to help peak these circuits accurately. The same protocol was used for my
CR-1 DXing as well.
Since there
are so many very strong signals here, I have added two inline L-C traps on the
antenna lead.
My first trap was made from a ferrite bar
loopstick inductor salvaged from an old transistor radio.
The second trap is
made with a ferrite toroid and Litz wire and produces deeper nulls than the
ferrite bar. The bar will soon be replaced by a second toroid trap.
The traps
allow me to significantly null any strong signals that could be covering up a nearby weaker
signal. For nulling, I set the signal generator on the frequency of the pest
signal and then tune the trap for a null while watching the meter. Once
everything has been tuned, I’ll often just sit and wait for the desired signal
to fade up to a detectable level on the crystal radio and then confirm its audio match to
what can be heard on the spotter radio. Very often, a signal initially too weak to be detected, will quickly pop up in signal strength to an easy-copy
level for several minutes, before dropping below the threshold of diode detection
level once again.
I am presently using a pair of RCA WWII sound-powered ('Big Cans') phones,
impedance matched to the
CR-1’s output with a multi-tap audio transformer. I have also used a nice set of extremely sensitive Western Electric 509Ws, manufactured in the late 20s. These are also impedance-matched to the
CR-1's output. On weak signal tone tests, I can see only a very tiny improvement with the RCAs versus the old 509Ws as both are very sensitive.
There is a large variation in propagation quality on the
broadcast band, especially this far north on the southern edge of the auroral zone. The difference from one night to the next can often be quite
dramatic. On most nights the band favors the north-south path while on geomagnetically quieter nights it’s the east-west path that dominates. The band needs to be in good shape for any worthwhile
hope of DX on a crystal radio.
On one of the recent better nights, one of the
stations in Alberta was so strong that it needed trapping! This was something I
saw quite often with my previous DX set but I didn't expect to see it with the
CR-1.
For crystal radio DX,
propagation is the best helper. Small
incremental improvements (in terms of db losses) can be made in any part of a crystal radio's systems
but on nights of good propagation,
tens of db improvement will magically
appear, thanks to Mother Nature!
When in Turkey, Larry had the opportunity to connect the
CR-1 to
the large FLR-9 circular antenna array used during the cold war for HF direction-finding of targeted signals. Covering 1.5MHz to 30MHz, the FLR-9 consisted of ninety-six 120' towers, suspending 1056 vertical elements ... all over a 1500' diameter ground screen! His notes show that he logged the
BBC,
Italy and
West Germany on the
CR-1 while using the array!
 |
| The FLR-9 array in Augsburg, Germany |
Although the
antenna system connected to my CR-1 is not nearly as impressive as an FLR-9
array, it is very capable on the broadcast band. I’m using my 630m inverted-L,
bypassing the tuning and 50-ohm impedance matching system, essentially feeding
it as a top-loaded vertical wire. The (somewhat slanted) vertical wire is
approximately 70’ which is then attached to a 3-wire 100’ long tophat. The antenna is very close to the ocean and parallel with the beach. The CR-1 ground
system consists of about 60 buried radials, varying in length from 30-60’. The
basic antenna is self-resonant at around 1200kHz.
Over about two weeks of evening listening, mostly between 9:30 and 10:30PM, I've logged 50 different stations ... far
more than I had expected to hear.
The log below shows all of the stations
heard. The stations in red are all local line-of-sight transmitters and are
extremely strong ... all are well over S9 on my Sony spotter radio. The stations
shown in blue are all ‘DX’, with the furthest so far being KOA in Denver, at 1100 miles.


The log illustrates just how much the blowtorch signals
prevent weak-signal detection, even with traps! The stations logged on 1510 and 1530 were only possible when the 1550 blowtorch lost their audio for about five minutes one evening! Selectivity becomes increasingly more
difficult towards the top end of the band and, unfortunately, there is a larger
concentration of strong locals (who seem to delight in over modulation and
splatter), making reception up there extremely challenging.
There are
still some lower-band signals that I have yet to log and they have been gradually
growing stronger as the nights get longer. As well, the region above 1600kHz may
still provide a few opportunities over the next few weeks, if the loud local on
1600 can be sufficiently trapped ... the next few weeks will tell if there’s
anything left in the CR-1’s tank!
Designing and building a crystal radio capable of hearing DX is a wonderful way to learn about circuit losses as each tiny system improvement can be quickly noticed. There has recently (2021) been interest in renewing the once very popular "Crystal Radio DX Contests" that ran a few years ago over a one week period. Perhaps it's a challenge you might like to investigate as well.