Propagation on MF has been excellent this past week and hopefully will continue to be good.
A 'challenge target' for listeners in North America is YEK - 329kHz
in Arviat, NU, on the NW shore of Hudson Bay. It's widely heard throughout North America and is a good target for listeners on both coasts. Listen for YEK's upper
sideband on 329.424 kHz with your receiver in the CW mode.
When tuning for NDBs, put your receiver in the CW mode and
listen for the NDB's CW identifier, repeated every few seconds. Listen
for U.S. NDB identifiers approximately 1 kHz higher or lower than the
published transmitted frequency since these beacons are modulated with
a 1020 Hz tone approximately.
For example, 'AA' near Fargo, ND, transmits on 365 kHz and its upper sideband CW identifier is tuned at 366.025 kHz while its lower sideband CW ident can be tuned at 363.946 kHz. Its USB tone is actually 1025 Hz while its LSB tone is 1054 Hz.
Often,
one sideband will be much stronger than the other so if you don't hear
the first one, try listening on the other sideband.
Canadian NDBs normally have an USB tone only, usually very close to 400 Hz. They also have a long dash (keydown) following the CW identifier.
All NDBs heard in North America will be listed in the RNA database (updated daily) while those heard in Europe may be found in the REU database. Beacons heard outside of these regions will be found in the RWW database. These databases have recently been re-vamped and are slicker than ever before!
From CLE coordinator Brian Keyte (G3SIA), comes the following CLE info:
Hello all,
Here are all the details for this weekend's co-ordinated
listening event.
First time CLE logs too? Yes, please!
Short logs are
always as welcome as long ones.
Days: Friday 22 January - Monday
25 January
Times: Start and End at midday, your LOCAL time
Range: 320.0 - 334.9 kHz
Please log the NDBs you can positively
identify that are listed in the frequency range (no DGPS please), plus any UNIDs
heard there too.
Send your CLE log to the List, if possible not in an
attachment, with CLE264 and FINAL at the start of its title.
Please show on
EVERY LINE of your log:
# The date and UTC (the day changes at 00:00
UTC).
# kHz - the beacon's nominal published frequency, if you know
it.
# The Call Ident.
Show those main items FIRST on each line,
before any optional details such as the NDB's Location, Distance, Offsets, Cycle
time, etc.
As always, make your log meaningful to everyone by including your
listening location and details of the receiver, aerial(s), etc.
It would be
OK to use one remote receiver, with the owner's permission if necessary,
provided that ALL your loggings for the CLE are made using it.
Joachim or
I will send the usual 'Any More Logs?' email at about 20:00 UTC on Tuesday so
that you can check that your log has been found OK.
Do make sure that your
log has arrived on the List at the very latest by
09:00 UTC on Wed. 27th
January.
We hope to complete the combined results within a day or
two.
You can find all CLE-related information from our CLE page ( http://www.ndblist.info/cle.htm ),
including a link to the seek lists provided for this Event from the Rxx
Database.
Good listening
Brian &
Joachim
---------------------------------------------------------------------
From:
Brian Keyte G3SIA ndbcle'at'gmail.com
Location: Surrey, SE
England (CLE
co-ordinator)
---------------------------------------------------------------------
If you are interested in some remote listening - maybe due to local
difficulties - you could use any one remote receiver for your loggings,
stating its location and with the owner's permission if required.(
e.g. see kiwisdr.com ) A remote listener may NOT also use another
receiver, local or remote, to make more loggings for the same
CLE.
These listening events serve several purposes. They
• determine, worldwide, which beacons are out-of-service or have gone silent since the last CLE covering this range
• will indicate the state of propagation conditions at the various participant locations
• will give you an indication of how well your LF/MF receiving system is working
• give participants a fun yet challenging activity to keep their listening skills honed
Final details can be found at the NDB List website, and worldwide results, for every participant, will be posted there a few days after the event.
The NDB List Group is a great place to learn more about the 'Art of NDB DXing' or to meet other DXers in your region. There is a lot of good information available there and new members are always very welcome. As well, you can follow the results of other CLE participants from night to night as propagation is always an active topic of discussion.
You need not be an NDB List member to participate in the CLEs and all reports, no matter how small, are of much value to the organizers.
Remember - 'First-time' logs are always VERY welcome!
Reports may be sent to the NDB List Group or e-mailed to CLE co-ordinator, Brian Keyte (G3SIA), whose address appears above. If you are a member of the group, all final results will also be e-mailed and posted there.
Please ... give the CLE a try ... then let us know what NDB's can be heard from your location! Your report can then be added to the worldwide database to help keep it up-to-date.
Have fun and good hunting!
No comments:
Post a Comment