YMW - 366 courtesy: ve3gop.com |
There is no doubt that as one ages, the passage of time seems to accelerate. Didn't we just have a CLE a couple of days ago?? In any event, this weekend finds CLE 250 focusing on 350.0 - 369.9 kHz, in search of NDBs.
For those unfamiliar with this monthly activity, a 'CLE' is a 'Co-ordinated Listening Event', as NDB DXers around the world focus their listening time on one small slice of the NDB spectrum.
If you've been meaning to participate in CLE, then maybe this weekend is a fine time to try! We continue to have a lot of first time submissions so you won't be alone!
As well, if you're trying to learn CW, copying NDBs is perfect practice as the identifier speed is generally slow and the letters are repeated again every few seconds!
A nice challenge in this one is to hear YMW - 366 kHz. 'YMW' is located in southwest Quebec, near Maniwaki.
'YMW' runs 500W into a massive vertical and is well-heard throughout North America as well as in Europe. Listen for its upper-sideband CW identifier repeated every 10 seconds (with your receiver in the CW mode) on 366.398 kHz.
This past week has seen the best propagation of the season so far. Hopefully it will extend into the CLE weekend ... but, it will be interesting to see if our CLE once again gets whacked by the Sun, just as it gets started. This has been the case for the past several CLEs as our monthly schedule seems synced with some nasty coronal hole on the Sun, also on a ~ 27 day cycle!
When tuning for NDBs, put your receiver in the CW mode and listen for the NDB's CW identifier, repeated every few seconds. Listen for U.S. NDB identifiers approximately 1 kHz higher or lower than the published transmitted frequency since these beacons are modulated with a 1020 Hz tone approximately.
For example, 'AA' near Fargo, ND, transmits on 365 kHz and its upper sideband CW identifier is tuned at 366.025 kHz while its lower sideband CW ident can be tuned at 363.946 kHz. Its USB tone is actually 1025 Hz while its LSB tone is 1054 Hz.
Often, one sideband will be much stronger than the other so if you don't hear the first one, try listening on the other sideband.
Canadian NDBs normally have an USB tone only, usually very close to 400 Hz. They also have a long dash (keydown) following the CW identifier.
All NDBs heard in North America will be listed in the RNA database (updated daily) while those heard in Europe may be found in the REU database. Beacons heard outside of these regions will be found in the RWW database.
From CLE organizer Brian Keyte, G3SIA, comes the details:
Our 250th Co-ordinated Listening Event is almost here.
Can new 'listening eventers' join in too? YES, PLEASE! Joachim and I are
always pleased to help first-time CLE logs through the harvester program.
Days: Friday 22 November - Monday 25 November
Times: Start and End at midday, your LOCAL time
Range: 350.0 - 369.9 kHz
Please log all the NDBs you can identify that are listed in this range (it
includes 350 kHz but not 370) plus any UNIDs that you come across there.
You can find full information to help you, including seeklists made from
RNA/REU/RWW, by going to the CLE page http://www.ndblist.info/cle.htm
and clicking on SEEKLIST.
Please send your 'Final' CLE log to the List, if possible as a plain text
email and not in an attachment, with 'CLE250' and 'FINAL' at the start of
its title.
Please show the following main items FIRST on EVERY line of your log:
# The full Date (e.g. 2019-11-22) or just the day number (e.g. 22)
and UTC (the day changes at 00:00 UTC).
# kHz - the beacon's nominal published frequency, if you know it.
# The Call Ident.
Optional details such as Location and Distance go LATER in the same line.
If you measure LSB/USB offsets and cycle times they are useful too.
Please always include details of your own location and brief details of the
receiver, aerial(s) and any recording equipment you were using, etc.
Joachim or I will send the usual 'Any More Logs?' email at about 20:00 UTC
on Tuesday so you can check that your log has been found OK.
Do make sure that your log has arrived at the very latest by 09:00 UTC on
Wednesday 27 November. We hope to make all the combined results
within a day or so.
Good listening
Brian
------------------------------------------------------------------
From: Brian Keyte G3SIA ndbcle'at'gmail.com
Location: Surrey, SE England (CLE coordinator)
------------------------------------------------------------------
(Reminder: If you wish you can use a remote receiver for your loggings,
stating its location and owner - with their permission if required.
A remote listener may NOT also use another receiver, whether local or
remote, to obtain further loggings for the same CLE)
These monthly listening events serve several purposes. They:
- determine, worldwide, which beacons are actually in service and on-the-air so the online database can be kept up-to-date
- determine, worldwide, which beacons are out-of-service or have gone silent since the last CLE covering this range
- will indicate the state of propagation conditions at the various participant locations
- will give you an indication of how well your LF/MF receiving system is working
- give participants a fun yet challenging activity to keep their listening skills honed
The NDB List Group is a great place to learn more about the 'Art of NDB DXing' or to meet other listeners in your region. There is a lot of good information available there and new members are always very welcome. As well, you can follow the results of other CLE participants from night to night as propagation is always an active topic of discussion.
You need not be an NDB List member to participate in the CLEs and all reports, no matter how small, are of much value to the organizers.
Remember - 'First-time' logs are always VERY welcome!
Reports may be sent to the NDB List Group or e-mailed to CLE co-ordinator, Brian Keyte (G3SIA), whose address appears above. If you are a member of the group, all final results will also be e-mailed and posted there.
Please ... give the CLE a try ... then let us know what NDB's can be heard from your location! Your report can then be added to the worldwide database to help keep it up-to-date.
Have fun and good hunting!
7 comments:
Heard beacon YPL this evening. My QTH is Northglenn CO, using a ground mounted Hustler vertical and a KiwiSDR.
Great to hear Steve! You should be able to log a lot during the CLE by the sounds of it!! Best of luck.
Hi Steve W0GSQ and welcome to the addiction...
Give NDBs a try before too many more are taken off the air. You have a good QTH for it. The guys on our "NDB List" forum are super inclusive and they are hungry to accept reports like yours. The forum is worldwide and fun. By all means join. Steve VE7SL will tell you how.
In Vancouver that frequency (382) is dominated by closer NDBs, YE and YPW. But they only interfere with each other. I can usually make out YPL's trace in the FLDigi waterfall whenever it strengthens. There's no chance I can actually hear YPL.
Good luck in the CLE. Condx not lookings promising. The Kp came up from 0 to 3 yesterday and the Bz went south. Condx tonight on 80m were poor - the band was alternating long and short - even locals were fading out.
GL
Dan VE7DES
(only) 400+ NDBs heard
P.S. I'm at VE7UBC tonight. The UBCARC station is to close indefinitely after 100 years of existence, with over 60 years in this office. Building to be demolished beforee end of 2019 AFAIK. A new QTH not available yet but we hope to reopen within a year or two, perhaps at the planned UBC EOC.
Hi guys...just took an early post sunset listen and it sounds rather awful...had to re-think my antenna connections a few times to be sure things were connected properly. Oh well...right on time for the CLE once again.
Thanks guys for the comments. Bacame interested in NDB listening last winter after purchasing an old Rycom voltmeter. It hears quite well but I usually use the KiwiSDR. I’m only home two nights a week so my radio time is limited but still having fun!
Well, I hit my target of 24 NDBs but Steve has put me to shame with 60. My average distance was also down from my last 350-369.9 CLE because I couldn't open the Pacific past POA LLD.
Couldn't even score "closest NDB" as I usually do. My only local was ZVR and it's OTA.
This time I have an excuse -- my QTH suffers an unexplained broad impulse noise around 362 kHz. My suspicions focus on the fire alarm system. When I hold an AM portable radio near a pull box, I hear a loud clattering or ticking sound that resembles what I hear on the Kenwood in the clubstation. My waterfall in AM mode has a ~10 pps comb. This effect has sunk to almost nothing on a few nights (yay!) but it's usually been loud enough to affect reception by 5-10 dB, and it even raises the S meter. The victims include SIT with its very quiet ID modulation, and the 353 cluster.
Steve, you exploited an opening from 6h-7h Zulu that I didn't. Was that Friday or Saturday night?
I am planning one more NDB session at UBC tomorrow night before they close the building. All the academic departments are cleared now. Only Crane Library and Hamsoc remain as permanent occupants, and the classrooms are being used only by student advisors. Crane is open only because students can write makeup exams there -- I guess because it's quiet (notwithstanding my efforts upstairs to keep up my CW skills). I have not seen any Braille patrons.
73 everyone - Dan VE7DES
Hey Dan! With all of the frustration you experience with the Brock Hall noise generators, it’s probably not a bad thing to be moving soon! Let’s hope you end up some place quieter and fairly quickly. Any idea where they want to put you?
I think the opening you’re referring to was the one that included RNB in NJ. Almost all of my logs were on Friday night, including that one, during the time slot you referenced. I was surprised at how early some of this eastern stuff was arriving as I was checking out some of my memory-bank propagation indicator channels. Many, including FIS in FL, were in shortly after sunset.
I see we’re in for another coronal-hole impact so that will continue to kill what has already been a crappy week.
Post a Comment